Technical
Cable Jacket & Conductor Materials, Explained
6 min read · BOTWO editorial team · checked against IEC, USB-IF and EU ecodesign documentation.
Two cables can look identical in a photo and behave completely differently after six months of daily use. The difference is not the connector — it is the conductor inside, the jacket outside, and the shielding in between. This is the guide we give buyers who want to specify durability instead of hoping for it.
Conductors: the metal inside decides current and life
The conductor carries both power and signal, so its material and strand structure decide charging speed, voltage drop and flex life.
- Bare copper (BC) — the baseline for quality charging cables. Low resistance, good flex life, predictable. What a serious factory quotes by default.
- Tinned copper (TC) — copper plated with tin. Slightly higher resistance, but resists oxidation and corrosion — preferred for humid climates and marine or industrial use.
- Copper-clad aluminum (CCA/CCS) — aluminum core with a thin copper skin. Cheaper, lighter, higher resistance. Avoid it for fast charging and 100W-class cables; voltage drop and heat rise quickly.
- Strand structure — “60×0.08mm” tells you 60 strands of 0.08mm; more, thinner strands means longer flex life. Ask for the strand count in writing, not just the AWG.
The practical test: ask two suppliers to quote “3A, 1m, USB-A to C” and compare the conductor line in their spec. If one says CCA, that is the whole negotiation in one word.
Jacket materials: five options and where each one wins
| Material | Feel | Durability | Where it wins |
|---|---|---|---|
| PVC | Standard | Good | High-volume retail, price-led markets. The default jacket. |
| TPE | Soft, matte | Very good | Premium feel without silicone cost; good cold-weather flexibility. |
| TPU | Firm, slightly rubbery | Excellent | Abrasion-heavy use — car, outdoor, industrial accessories. |
| Silicone | Very soft, silky | Good (tears easier) | Touch-first products, gift sets, brand-differentiating lines. |
| Braided nylon over core | Textured | Excellent | Retail cables sold on looks; hides scuffs, resists tangling. |
A common mistake is ordering braid for its look but a PVC-only core underneath. Braid protects the jacket, not the conductors — the core construction still decides electrical performance.
Shielding: what protects the data inside
For charge-only cables, shielding is optional. For any cable that carries data — especially 5Gbps and above — shielding decides whether the link is stable. The standard build is aluminum foil plus tinned-copper braid: foil against high-frequency interference, braid for mechanical strength and lower-frequency noise. On the compliance side, RoHS 2011/65/EU restricts substances in the jacket compound and REACH (EC) 1907/2006 governs the SVHC list — the same compound can satisfy one and fail the other, so both declarations belong in your file.
If an order is for USB 3.2 or USB4 cables and the supplier’s spec sheet does not mention the shield construction, treat it as missing information and ask for it in writing.
Strain relief and connectors: where cables actually break
Cables rarely fail in the middle. They fail at the joints, where all consumer return statistics point. Three specifications push that failure point far into the future:
- Strain relief length — an extended, flexible transition at both ends, not a hard plastic collar. Ask for the bend-cycle target (a common standard is 10,000 cycles at a defined radius).
- Overmold hardness and shell — soft-touch overmolds absorb stress; aluminum shells add rigidity — pairing the right shell to the jacket matters more than picking the most expensive one.
- Pull and insertion ratings — ask for the pull-force target and insertion-cycle count with the sample, not after the order.
What to put in your RFQ
Name the standard the cable has to meet and the answers get specific. For a USB-C assembly that is the USB Type-C Cable and Connector Specification (USB-IF, release 2.2 or later); a charge-only assembly may need nothing beyond an EN 62368-1 safety file. Citing the document saves a round of questions.
A one-paragraph RFQ that forces clear answers:
- Conductor: material (BC / TC / CCA), strand count, AWG, verified by cross-section photo.
- Jacket: material, hardness, thickness; braid density if braided.
- Shield: foil + braid, coverage percentage.
- Ratings: bend cycles, pull force, insertion cycles — with test method.
- Compliance: RoHS, REACH, and the certificate scope for your market’s charging standard.
Suppliers who answer all five in writing are the ones worth a sample order. Vague answers at RFQ stage predict vague quality at shipment.
Match the spec to the market
The right jacket and conductor spec depends on where the cable sells and what it must do. A price-led market wants a reliable PVC/BC volume cable; a premium retail line wants braid or silicone with color options; fast-charging SKUs need pure copper sized for the current. Our USB-C power ratings guide covers the electrical side in detail: pair the two and your spec sheet covers both the outside and the inside of the cable.
Ready to price your cable project?
Send specs or a reference photo — engineers reply with a spec sheet and quote within one business day.
