تقني
HDMI 2.2 و Ultra96: ما الذي يجب على المشتري التحقق منه
6 min read · BOTWO editorial team · checked against HDMI Licensing Administrator specifications و certification requirements.
Every few years the HDMI specification moves, و the market spends the following eighteen months selling cables that claim the new number without necessarily meeting it. HDMI 2.2 continues that pattern: the headline is bandwidth, the real question is certification, و the gap between the two is where importers lose money.
This is a buyer's guide to what actually changed, how the certification tiers now work, و the specific checks that separate a genuine Ultra96 assembly from a cable with a new number printed on the jacket.
The bandwidth tiers, in plain terms
Cable tier و protocol version are two different things, و the packaging rarely makes the distinction obvious. The certification tiers that matter for buying decisions are:
| Cable certification tier | Maximum bandwidth | What it serves | Label |
|---|---|---|---|
| Standard Speed | ~2.25Gbps | Legacy 1080i/720p | Standard Speed mark |
| High Speed | ~10.2Gbps | 1080p, early 4K | High Speed mark |
| Premium High Speed | 18Gbps | 4K60 with HDR | Anti-counterfeit label per cable |
| Ultra High Speed | 48Gbps | 4K120, 8K60, HDMI 2.1 features | Anti-counterfeit label per cable |
| Ultra96 | 96Gbps | HDMI 2.2 applications, حتى 12K | Ultra96 certification program |
Two practical points follow from that table. First, a cable that meets 48Gbps is not automatically an Ultra96 cable — the higher tier requires passing a different, harder test regime. Second, a product can support an HDMI 2.2 feature name at a lower bandwidth; the feature label و the cable tier are separate claims, و only the cable tier describes the copper.
Why 96Gbps is a different engineering problem
Doubling bandwidth is not doubling copper. At 96Gbps the signal on each lane is fast enough that impairment mechanisms which were tolerable at 48Gbps become limiting:
- Insertion loss — attenuation rises with frequency, so a passive copper assembly has a hard length limit at this rate. Long Ultra96 runs are active or hybrid designs, not plain copper.
- Pair-to-pair skew — the four high-speed pairs must arrive together; at 96Gbps a skew that was invisible at 48Gbps closes the eye.
- Impedance control — the connector transition becomes a significant discontinuity. Board-to-shell geometry و solder termination quality matter more than the cable itself in many failures.
- EMI و crosstalk — shielding construction و pair isolation shift from nice-to-have to pass/fail.
That is why the tier is certified rather than self-declared, و why the same factory that builds a solid 48Gbps Ultra High Speed assembly may need new tooling, new connector parts و a new test setحتى reach 96Gbps.
The certification label is the product, not the packaging
For Premium High Speed و Ultra High Speed, the HDMI Licensing Administrator issues a certification label per cable with an anti-counterfeit element, verifiable through an app. The label is not decoration on the box — it is issued against a specific tested assembly و a specific length. Three consequences for buyers:
- Labels are per unit, not per carton. A carton marked with a certification claim but containing cables without individual labels is a red flag worth resolving before shipment.
- Verify a sample through the app. Two minutes with a phone settles whether the label is genuine و whether it corresponds to the length you ordered.
- الطول matters. A certified assembly at 2m does not make a 5m version of the same cable certified. Where lengths are sold outside the certified range, the claim no longer holds.
Authorized Test Center testing و what it covers
Certification for these tiers runs through Authorized Test Centers (ATCs), which test against the compliance test specification for the tier. What that establishes, و what it does not:
- Establishes: the sample submitted meets the electrical requirements of that tier at that length, including eye-diagram margins و the connector parameters the specification defines.
- Does not establish: that every unit in the shipment is identical to the sample. That is a manufacturing control question — which is why the factory's own hipot, continuity, و impedance screening on 100% of production still matters.
- Does not transfer: a certificate covers the assembly tested. Changing the connector supplier, the cable construction, or the PCB inside an active cable is a different product.
So the buyer's question is not only "do you have the certificate" but "does the certificate name this construction, this connector, و this length" — و then "what do you test on every unit".
Mislabelling: how it happens و how to catch it
The failure mode is not usually fraud at the top of the supply chain. More often it is a trading company relabelling stock, or a factory offering the new tier before its assembly actually passes. Five checks catch most of it:
- Ask for the ATC report, not the marketing sheet. The report names the test standard revision و the measured margins.
- Check the connector shell part number. الموصلات rated for 96Gbps differ from 48Gbps parts; the datasheet should confirm the rating.
- Weigh و cross-section one unit. A 96Gbps passive assembly has visibly heavier shielding و tighter pair construction than a 48Gbps one at the same length.
- Test on a source that actually stresses it. A 4K60 display proves nothing about 96Gbps. Ask which source و sink the factory tested with.
- Buy the length you will sell و certify that. Certification at 1m tells you nothing about a 3m retail SKU.
What most markets actually need
Bandwidth sold و bandwidth used are different numbers, و this is where distributors overspend or under-serve:
- Consumer retail, mainstream: 4K60 with HDR — Premium High Speed (18Gbps) covers it و costs less. Selling Ultra96 into this segment is selling headroom nobody uses.
- Gaming و premium AV: 4K120, VRR, eARC — Ultra High Speed (48Gbps) is the working tier.
- Pro AV, 8K workflows, و early HDMI 2.2 hardware: the segment where Ultra96 has a real justification today. It is a small but high-margin part of the market.
A defensible lineup for most distributors is two tiers, not five: the mainstream tier for volume, و the top tier for the customers who ask for it by name — with the certification label intact و the length range honestly stated.
المواصفاتification lines worth writing into the order
- Certification tier by name, plus the maximum bandwidth in Gbps.
- Certified length range, و what changes above it (active, optical, or not offered).
- Connector part number و its rated bandwidth.
- Test standard revision the ATC report was issued against.
- Per-unit certification labels required, و the label verification method.
- 100% production screening items: continuity, hipot where applicable, impedance or eye screening sample rate.
For the electrical background on cables that carry power as well as data, our notes on jacket و conductor construction cover what sits underneath the shielding, و the USB-C power ratings guide covers the parallel question on the USB side.
Sourcing Ultra96 without paying for a number on a box
Three questions reduce the risk to almost nothing: which ATC issued the report, which length did it cover, و what does the factory test on every unit rather than on samples. A supplier with real Ultra96 capability answers all three from a file. A supplier relabelling stock answers the first one vaguely و changes the subject on the other two.
The range this applies to runs from High Speed و Premium High Speed assemblies for mainstream retail through Ultra High Speed at 48Gbps for gaming و premium AV, with certification documentation و per-unit labels handled per order. If the target tier is Ultra96, the length range و the connector part number need to be settled before the price is even discussed.
جاهز لتسعير مشروع كابلك؟
أرسل المواصفات أو صورة مرجعية — يرد المهندسون بورقة مواصفات وعرض سعر خلال يوم عمل واحد.
